Knowledgebase: VeCOAX MiniMod-2
My Video Is Not Playing on my TV
Posted by PVI Support, Last modified by PVI Engineers on 17 February 2018 07:47 AM

My Minimod 2 or Mircomod 3 Video Is Not Playing on my TV

Please check all connections, Units Settings, Correct TV Standard is set for your TV.

Ensure your video source is working or Set to a Correct Fixed Resolution. Please refer to your

HDMI source Owner’s manual on how to set a fixed resolution.

 

You could also try with another TV with no HDMI connected to ensure you are getting a signal(PVI Logo will display),

or reset the VeCoax unit by holding the ESCAPE button for until it prompts you to factory reset the unit.

Press enter to reset the unit’s settings to default.

 

This may also be done in the advance menu of the unit called “RESET.” If the “ON-AIR,” LED does not stay steady,

please ensure your HDMI source is set to a fixed resolution of 1080P or 720P and connected directly to the Unit.

If you are using a HDMI Splitter, some HDMI splitters don’t support EDID pass-through (Extended Display Identification Data used

to tell the source or TV what video resolution is supported) Test your HDMI source without the HDMI Splitter connected.

 

For More Information Please Refer to the Manual of the Unit

 

 

vecoax minimod micromod minimod2 mini mod micro mod micromod3 directv direct tv dish dishnetwork comcast spectrum bright house brighthouse turner warner bluray dvd roku blade