Knowledgebase: VeCOAX MiniMod-2
No Audio
Posted by PVI Engineers, Last modified by PVI Support on 07 June 2018 01:48 PM

No Audio

Please make sure you are connecting directly the hdmi video source to our device, so the EDID from our device can properly set the source to provide the correct audio.

If you use an HDMI splitter to feed our device and other devices, make sure to set on your splitter the EDID to be taken from our device.

If our device cannot communicate the edid with the source the results can be random as the audio could be set for another device and not for our device

Should you need to use an HDMI splitter, select one with EDID management, so you can control the edid flow properly.

You can also SET THE HDMI AUDIO OUT on your source to STEREO PCM LINEAR

Bad audio detection can cause effects also on the video as the audio is master clock.



tags:
Audio- No audio - audio distorsion - distorted audio - audio noise - hdmi splitter - audio scrambled - minimod mini mod micromod micro mod minimod2 micromod3 blade