Knowledgebase: VeCOAX MiniMod-2
Injecting into Cable Service Providers Box
Posted by PVI Support, Last modified by PVI Support 202 PVI Support 202 on 19 June 2019 02:16 PM

You can contact your local service provider of your basic cable to find the frequencies that they use and fine the ones that are available for you to use.

If you wish to inject into a Digital Cable Converter box or STB (set-top box) most of the time the service provider will include a channel you may broadcast onto or some providers require a specific PID’s to be set which can be set in the ADVANCE MENU in order for the Set to box to be able to read the channel. A Engineer from your Service provide should give you this information.

 

For Example with the provided information from your Service Provider:

 

(THIS IS AN EXAMPLE)

 

Channel 100 is open

That is 651.000Mhz

Then they will use a VCT(major & minor)

23.2 - Their set to box will see this as channel 232 

 

Incription information - PID's

PMT - 80

Video PID - 50

Audio PID - 51

PCR - 50 - Must be same as Video

 

 (NOTE: Charter Spectrum does not support signal injection)

 TAGS: cable box inject show on Comcast Timewarner