VeCOAX ULTRA BT manual
Attached is the manual for the VeCOAX ULTRA series
Quick Set manual -
https://drive.google.com/open?id=1Z8Xx1Rdu8KTFJsoLBpyNRG3J9XlCrK_e
[https://drive.google.com/open?id=1Z8Xx1Rdu8KTFJsoLBpyNRG3J9XlCrK_e]
Tags:
VeCOAX ULTRA...
If you cannot receive on one TV, follow this procedure:
1) Make sure the Modulator is set as per the manual ( Reset to default
)
2) Connect a TV Direct to the Modulator with a short piece of cable
3) Turn on the modulator and scan / find the modulator...
For Combining ATSC (Over the Air channels) you must find the
frequencies that are used by your local stations.
This information can usually be found online by searching for,
“(insert your local area) ATSC frequency chart.”
This will give you a nice tabl...
DirecTV - Guide Settings
ATTACHED BELOW:
If you have our Compact RF series modulator you can also force the
resolution to a FIX value. Advanced menu> FIXED EDID> 720P or 1080i/p
This will stop the Direct TV box from changing its resolution on its
o...
Major / Minor channel numbers ( also called VCT virtual channel table
) are the DESTINATION POSITION on your TV CHANNEL LIST for each of
your VeCOAX channel
If you set MAJOR = 1 MINOR = 1 on your VeCOAX for a specific channel,
that will show on your TV w...
You can contact your local service provider of your basic cable to
find the frequencies that they use and fine the ones that are
available for you to use.
If you wish to inject into a Digital Cable Converter box or STB
(set-top box) most of the time the ...
For Combining ATSC (Over the Air channels) you must find the
frequencies that are used by your local stations. This information can
usually be found online by searching for, “(insert your local area)
ATSC frequency chart.” This will give you a nice table ...
My Camera DVR is not recognized with your unit
Please set your Camera Recording DVR output resolution to a fixed 1920
X 1080 60Hz or 1280 X 720 60 Hz or 1080P/720P Depending on your model.
Please refer to your DVR Manual
Tags:
Camera DVR Surveillanc...
MY SDI TO HDMI DOES NOT WORK WITH MY UNIT
try another SDI > TO > HDMI converter the actual one might not
propagate the resolution EDID from the SDI to the HDMI output
HDMI requires the EDID to be properly formatted so the encoder can "
understand " whi...
Analog-only Television, monitors, projectors can be converted to
digital-tuner capable by simply using an external tv set top box
These are decoders with remote control that outputs RCA and HDMI to
your TV from a digital antenna / cable signal
Find AT...
MY SCREEN GOES BLANK/ VIDEO DISAPPEARS WHEN I CHANGE THE CHANNEL OF
MY SERVICE PROVIDERS CABLE BOX
This is a common issue with the STB Cable boxes from your Cable
Providers such as Xfinity Comcast, Spectrum, Shaw, DirecTV, Dish and
many more.
An...
In order to watch your vecoax channels on comcast boxes you must
obtain from comcast the information about
1) channel ( frequency ) to use to watch your modulator > set on our
modulator
2) service numbers ( hexadecimal values ) > set on our service id...