VeCaster H.254 / H.256 HEVC / 4k HD Stream Server - Manual
Please try disconnecting your HDMI source and see if you can access
the unit
Check your static IP address set on your PC/laptop
Try factory resetting the unit using the reset button on the back of
the unit. Hold it for 30 secs and power cycle the unit....
HOW TO SET A STATIC IP ON VECASTER/VECODER
To set a static Ip on your unit please go to the network settings
under the system tab of the unit as shown below
To set a static IP please change the default IP: 192.168.1.168 to a
new IP address you wis...
PVI can not go into detail on taking a stream and go live onto a
website. We are not web developers.
However, Here is link to an article to help you put it all together.
https://www.dacast.com/blog/how-to-setup-live-streaming-video-on-website/
...
To play your streams you can use:
TSREADER > download from http://tsreader.com/
TSreader allows you to select the IP on your computer to receive the
stream, very important if you have multiple adapters ( physical or
virtual ) installed as VLC sometime ...
If your Vecaster is freezing or becoming unresponsive on your vlan
this could be your network settings.
Factory reset your unit by using the hard reset button on the back of
the device
Test using the default settings and directly connect to the un...
IMPORTANT - READ HERE FIRST BEFORE YOU PROCEED -
SMART IPTV app is a PAID APP provided by third parties
This quick guide is solely provided as a quick reference
For detailed instructions and support on this app, please ONLY refer
to siptv.eu website
---...
Power Supplies devices are subject to the AC supply including power
surges and other damaging events.
For this reason None of the power supplies are covered by warranty in
full.
We offer a partial warranty to exchange your actual eternal power
supply ...
1) on your SMART TV go to its app store
2) find your favorite IPTV player app
3) install it and follow its instructions
4) add your M3U8 LINKS FROM YOUR PVI VECASTERs VECODERs encoders into
your TV APP list
note: m3u8 streams are active on your pvi...
Please refer to SmartIPTV app for guides on setting up streams.
As this is a third party app we only can provide limited support.
Here are some suggestions you can try
1.Check to see if your can view the stream Via VLC player
If VLC plays the strea...
To stream your Vecaster to Facebook you will need to enable the RTMP
PUBLISH URL
Facebook gives you a URL link and Stream key
facebook.com/facebookmedia/get-started/live/
STREAM KEY
Combine them as shown below
facebook.com/facebookmedia/get-star...
VLC Player Streaming Guide
Attachment below
Tags: Multicast Unicast Streaming RTSP IP
To stream your Vecaster to Youtube you will need to enable the RTMP
PUBLISH URL on the unit.
Youtube gives you a URL link and Stream name
rtmp://a.rtmp.youtube.com/live/
STREAM NAME
Combine them as shown below
rtmp://a.rtmp.youtube.com/live/STRE...
To use Akamai with the Vecaster or Vecoder RTMP stream you can do the
following.
Akamai usual gives you
RTMP URL
rtmp://
[rtmp://p.ep702700.i.akamaientrypoint.net/EntryPoint/]p.ep75735.i.akamaientrypoint.net/EntryPoint/
RTMP Stream
dkrlive7_1_10001@...
If VLC is not playing your IP Streams then please check the following
1.Is your PC in the same Network range as your Stream?
Encoder IP:192.168.1.168
PC IP: 192.168.1.100
2. Are you directly connected to the IP port of the Streaming Encoder?
3...
HLS format developed by Apple prebuffers frames to make it easier for
Mobile devices to receive the video stream. This can be from 30secs up
to 2-minute delays from the live source.
If you wish to get ultra-low delay we suggest using the TS format or
...
