Using Raspberry PI as a HDMI Source
Posted by PVI Support on 13 November 2018 10:44 AM

In order to use the Raspberry PI as s HDMI source sometimes it is required to preform the following on your raspberry PI:


From shell prompt “sudo tvservice -d /boot/edid.dat”

Then “cd /boot”

Then “vi config.txt”

Add the following 2 lines:



hit Esc key and then “:wq!”

reboot and everything will now work normally




**Raspberry PI configuration changes are done at your sole discretion and at own risk.  PVI is not responsible for any damages.**

Comments (0)