How to set a static IP for Vecaster / Vecoder
Posted by PVI Support, Last modified by PVI Support 202 PVI Support 202 on 19 June 2019 02:15 PM
How to set a Static IP on Vecaster/Vecoder
To set a static Ip on your unit please go to the network settings under the system tab of the unit as shown below
To set a static IP please change the default IP: 192.168.1.168 to a new IP address you wish. Hit setup to save the changes and restart the unit. Test the new Ip address directly connected to the unit to ensure you are able to connect to it. Please note that you must set your PC to a new static IP as well to match the same range as the new IP on the unit you just set such as :
New IP of Unit : 192.168.3.123
New PC Static IP : 192.168.3.100
If you are moving the unit over to your network that has DCHP then you must follow the DHCP Range that Your router provides you. You can find this range on your routers settings.
Also you must not set the IP address to something that is already assigned.
Router DCHP Range: 192.168.0.20 – 192.168.0.99
PC 1 – Set to 192.168.0.21
PC 2 – Set to 192.168.0.22
Fire TV – Set to 192.168.0.23
We can set the Vecaster to 192.168.0.24 because that is available and not in use.
Note: Please ensure that you reset your PC’s static IP address back to Auto mode when not directly connected to the unit so that you can connect back to your local network.
For more Information on Networking and DHCP please refer to your Network/router manual or Very helpful guides that can be found online.
TAGS: Static IP Vecaster vecoder Network router DCHP