Knowledgebase: VeCOAX MiniMod-2
Setting up multiple units on one Coax Cable
Posted by PVI Support, Last modified by PVI Support 202 PVI Support 202 on 19 June 2019 02:20 PM

To set up multiple units on one coax cable please do the following


1. Set each unit with its own Frequency.

Example: Unit 1 783000 MHz

    Unit 2 789000 MHz  

2. Set each unit with its own Major and Minor channel

   Example: Unit 1 Major 1 Minor 1

       Unit 2 Major 2 Minor 1


3. Test directly connect to the coax out of the combined units to ensure you receive the signal. This can be done by using a two way splitter in reverse

Minimod 1----------

                             Two way splitter reversed-------------------Test TV

Minimod 2----------